4.3" GPS RearView
4.8" GPS RearView
5.0" GPS RearView
4.3" GPS Navigation
4.8" GPS Navigation
5.0" GPS Navigation
8 Rear/Front Sensors(SD8)
6 Rear/Front Sensors(SD6)
4 Rear Sensors (SD4)
4 Rear Sensors (SD4-T)
2 Rear Sensors(SD2)
Sound Only System(SS2)
4 Rear Sensors(SD4WLS)
Home Contact Warranty Shopping Cart Checkout
SD4-T Rear Mounted Digital Read-Out 4 Sensors System

Item Price: $35.00
(Shipping & handling will be calculated based on the shipping zip code)
Detecting Distance118"-11.8"
Display Unit Size3.5" x 1" x 0.5"
Wire Length (Rear Sensor)8 feet
Beeping in the Display UnitYes
Sensor's Size20 mm
Sensor WaterproofYes
Power Supply12V
 4 ultrasonic sensors mount on your bumper with plugs to the control module which snaps in.
 Digital and Cursor shows the distance range.
 Display unit mounted in the the rear windshield for easy installtion and better looking.
 Inversion Display on the Rear Windshield, so you can watch the number in the rearview mirror.
 The system alerts with a variable multitone audio pulse and panel display.
 The system sensors transmit a modulated beam signal which is capable of seeing through fog, rain, smoke, and snow day or night.
 The device is only activated when the driver puts their vehicle into reverse.

Step 1: Connect the Electric Power Step 2: Install the Backup Sensors for
           Insert-In Style
  • Open the trunk, on the back of the blanket, find the wires to the back light housing.
  • Use of a 12 volt multi-meter, Probe the appropriate wiring harness which heads toward the reverse light connector of the vehicle, looking for the wire which carries 12 volts + when reverse gear is engaged, and no voltage when reverse gear is disengaged. Never use a test light to probe wires.

  • Once you have located the proper reverse light power wire, use a quick connector (included) to connect the RED wire from the control processer. You do not need to cut any wire.
  • Drill four holes in the bumper via provided drilling bit.
  • Install the insert-style sensors in the bumper.
  • Run the wires of sensors into the trunk, and plug in the control center.
  • Connect the power line of control center with the power line of backup light.
Affiliate Sites:     Backup Sensor Shop    Auto Electronics Center    Security Camera E-Shop
©COPYRIGHT - Times International Business Co., 2011. ALL RIGHTS RESERVED.